Description:
this boiler is a special design for generator group exhaust gas recovery.this boiler use pin tube as reinforce heat transfer components,which greatly increase the heat transfer area,Meanwhile the gas flow become a strong turbulence during going through the pin tube surface.the advantage of the boiler is simple structure ,high efficiency,long running life,safety and convenient maitain.
Feature:
1,the boiler use pin tube as heat transfer component,which can increase heat transfer area 7-8 times,raise coefficient of heat transfer 2 times.So the heat transfer efficiency is raised 14 times.
2,the boiler has the ability of self-clean.the gas flow become a strong turbulence during going through the pin tube,which make the dust&ash difficult to accumulate on the tube.
3,the basic invest of the boiler is only 50-70% of the ordinary
boiler,cheap and high cost performance.
Exhaust gas boiler parameter (Boiler customization available):
| No. |
Item |
Parameters |
| 1 |
Operating pressure |
1.0MPa |
| 2 |
Design pressure |
1.1MPa |
| 3 |
Operating temperature(inlet/outlet) ºC |
60/184ºC |
| 4 |
Design temperature |
200ºC |
| 5 |
Hydraulic test pressure |
1.4MPa |
| 6 |
Maximum dimension: length ×diameter |
2885×Φ1525 (mm) |
){kind=link}
){kind=link}